Better Operation Safety

EcoSol - Brine water pump by ecoTec Energy with increased operational safety

ecoTec Energy counts on closed loop heat source systems with hydraulically separated geothermal collectors in the ground (heat source) for the following reasons:
  • There is always sufficient oil supply for the compressor, since the cooling circuit is restricted to the housing and thus there are only minor pipe surfaces
  • The hydraulic separation ensures protection of the evaporation heat exchanger against erosion (e.g. abrasion by flour sand) and corrosion (e.g. chemical decomposition by substances in the ground)
  • The hydraulic separation of the cooling circuit allows environmentally safe application also in water preservation areas




( <<-- back one chapter ) EcoSol - Brine Water Pump by ecoTec Energy High performence rates for heating system and non-potable water by means of hot gas
( <-- back one page ) Functional Details of the EcoSol Heat Pump by ecoTec Energy Modulating low temperature circuit and water heating to constant high temperatures
( Index ) EcoSol - Brine Water Pump by ecoTec Energy High performence rates for heating system and non-potable water by means of hot gas
( next page --> ) Increased Efficiency EcoSol - for higher efficiency by a more sophisticated system design
( next chapter --> ) Multi-fuel burner - the Burner for Many Oil Types by ecoTec Energy Multi-fuel burner - the universal burner for almost all fuels, especially for operation with all vegetable oils, as well as biodiesel and heating oil
German version Erhöhte Betriebssicherheit
Contact email
 ecoTec Energy AG, Inc. 
 Cooled Photovoltaic 
 Heat Pump 
 Multi-fuel burner 
 Heat Pump 
 Functional Principle 
 Procedures 
 Functional Details 
 Operation Safety 
 Increased Efficiency 
 Heater Flow Temperatures 
 Brine Temperatures 
 Heat Sources